Products

Home / Products/ Stone and Ceramic Honeycomb Composite Panels / Ceramic Aluminum Honeycomb Composite Panels

Ceramic Veneer Backed with Aluminum Honeycomb Panels for Merto Station and Rail Station

1. General In formation Ceramic honeycomb composite panel consists of a super-thin ceramic tile (3mm-10mm) and an aluminum honeycomb panel or fiberglass honeycomb panel, tightly bounded together by highly adhesive film. This kind of product maintains the beauty of ceramic tiles while overcome...

Send Inquiry

Product Introduction

1. General Information

Ceramic honeycomb composite panel consists of a super-thin ceramic tile (3mm-10mm) and an aluminum honeycomb panel or fiberglass honeycomb panel, tightly bounded together by highly adhesive film. This kind of product maintains the beauty of ceramic tiles while overcome their disadvantages of fragility and heavy weight. Puts an aluminum sheet between the stone veneer and aluminum honeycomb so that the products have good impact resistance and flexural strength.

Stone or ceramic aluminum honeycomb panel generally made of 3-5mm stone glued on 10-25mm aluminum honeycomb board. For the outer wall, recommended stone aluminum honeycomb board with stone thickness of 5-8mm and aluminum honeycomb board thickness of no less than 25mm. For interior wall, recommended stone aluminum honeycomb board with stone thickness of 3-4mm and aluminum honeycomb panel thickness of 15mm. For the built-in ceiling, recommended stone aluminum honeycomb board with stone thickness of 3-4mm, aluminum honeycomb board thickness of 15-20mm.For the floor, recommended stone aluminum honeycomb board with stone thickness of 6-10mm, aluminum honeycomb board thickness of 10-15mm.

Structure of ceramic honeycomb composite panels

图片58.jpg

2.Specification of ceramic honeycomb panels

Stone Type	Marble, Granite, Travertine, Sandstone, etc.
Panels Thickness	10mm-400mm
Stone Thickness	3mm, 5mm, 6mm, 8mm, 10mm, etc.
Stone surface treatment	Brushed, polished, honed, flamed, grooved, rubbing, etc.
Width:	300mm-1200mm
Length	300mm-3000mm
Max Size	1500mmx6000mm

3.Features:

(1) Light weight, the standard stone marble honeycomb panel weights 16kg per square meter, which is 1/5 of that of the pure stone panel.

(2) High intensity and high capability of anti-strike; its intensity is 10 times of

that of the natural stone.

(3) Good quality of sound insulation and heat insulation.

(4) Convenient to construction, easy to installation.

(5) Low weight, lower burden to the building, increase building life span.

(6) Good weather and corrosion resistance.

(7) Can be made to flat shape, arc shape and sphere shape etc. wide optional color, good decoration effect;

(8 ) Environmental friendly, super pollution resistance , easy to clean and quick to fit and can be recycled.

4.Technical Data of stone honeycomb panels:

Items		Technical requirements
		W	N
Contamination resistance		No visible residual contamination
Falling ball impact resistance		No glue-off or damage
Soft heavy object impact resistance		No glue-off or damage
Flatwise compressive strength/MPA		≥0.8	≥0.6
Flatwise compressive elastic modulus/ MPA		≥30	≥25
Flatwise shear compressive/ MPA		≥0.5	≥0.4
Flatwise shear compressive/ MPA		≥4.0	≥3.0
Climbing drum peel strength (N.mm/mm)	Average value	≥50	≥40
	Minimum value	≥40	≥30
Flatwise tensile adhesive strength MPA	Average value	≥1.0	≥0.6
	Minimum value	≥0.6	≥0.4
Flexural strength (standard value) MPA	Granite	≥8.0	-
	Sand stone, Marble, Limestone	≥4.0
Flexural rigidity (N.mm2)	Aluminum honeycomb panel	≥1.0 x 109	≥1.0 x 108
	Steel honeycomb panel	≥1.0 x 109
	FRP honeycomb panel	≥1.5 x 108
Shearing rigidity/N		≥1.0 x 105	≥1.0 x 104
Hot water resistance	Appearance	No abnormalities	-
	Average decrease percentage of flatwise adhesive strength (%)	≤ 15
Temperature different resistance	Appearance	No abnormalities
	Average decrease percentage of bending strength (%)	≤ 20
Anti-freezing	Appearance	No abnormalities
	Average decrease percentage of flatwise adhesive strength (%)	≤ 15
Note: The width of the sample in flexural test is 100mm.

5. Production Process of Stone Honeycomb Composite Panels

图片59.jpg

6. Applications:
Stone honeycomb panels can be used in
1. Interior and exterior wall cladding, curtain wall
2. Furniture board, tables, and door
3. Bathroom, kitchen interior decoration;
4. Marine vessels interior decoration;
5. Ceiling, roofing & flooring
6. Partitions (wall partition and toilet partition)
7. Decoration material for office buildings, shopping mall, hotels, metro, subways station, train/railway station, air terminal
8. Cleaning room
9. Machine board
10. Bus, Truck, Camper, Ship, Aerospace Industry
11. Lift and Elevator decoration

图片60.jpg