3-5mm Thin Stone Veneer Backed With Aluminium Honeycomb Panels
General Introduction of Stone Honeycomb Panels HWSTRONGER stone honeycomb panel is a kind of lightweight decorative composite panel comprised of a thin stone veneer bonded to aluminum honeycomb panel or fiberglass honeycomb panel. The ultra-thin stone honeycomb panel is made by the introduction...
General Introduction of Stone Honeycomb Panels
HWSTRONGER stone honeycomb panel is a kind of lightweight decorative composite panel comprised of a thin stone veneer bonded to aluminum honeycomb panel or fiberglass honeycomb panel. The ultra-thin stone honeycomb panel is made by the introduction of the Italian cutting equipment and technology to cut the natural granite and marble stone into 3m-5mm thick veneers, and then use the vacumm composition technology to bond the stone to honeycomb backing panels.
Actually HWSTRONGER stone honeycomb panels can be made from any type of stones such as granite, marble, limestone,travertine, quartz, slate, sandstone as well as ceramic porcelain tiles.
The stone honeycomb panel overcomes the fraigility and heavy weight of solid stones, its weight is only 1/5 of solid stone while can resist 60 times more impact. At the same time it keeps the natural beauty of stones. Nowadays our stone honeycomb panels are extensively used in interior and exterior decoration, building restoration, high end ship and vessel decoration, furniture top and etc.
By using HWSTRONGER stone honeycomb panels you will have much benefits:
Reduced weight greatly than solid stone
Increased impact strength, less brittle
Keep beauty of natural stone
Non-combustible, our aluminum honeycomb panel is A2 fire rated
Wide ranging stones (granite, marble, onyx, travertine,slate, limestone, sandstone, quartz, ceramic tiles)
Multiple finishes (polished, honed, flamed, bush hammered, sandblasted and more)
Easy and quick installation
Unlimited uses and applications
Environmental friendly, aluminium honeycomb backing panel is 100% recyclable
Cost effective,reduced structural costs and less workforce in installation .
Installation of stone honeycomb panel
We also supply the specialty aluminum connecting profile to install the stone honeycomb panels.
The most commonly used installation method of stone honeycomb panel is dry hanging system.
To use a pair of interlock aluminum profile to connect the stone honeycomb panel and the steel tubes.
One of the profile is fixed to the back of honeycomb panel, the other one is fixed to the steel tubes.
Application of stone honeycomb panels:
There is no limit of the stone honeycomb composite panels, you can imagine to use everywhere you want.
Building decoration: interior and exterior walls, ceilings, floors
Bathroom walls, partitions
Furniture tops, countertops
Interior decoration in shis and vessels
- Previous: FRP/GRP Honeycomb Panels For Trucks, Trailers, Ship Buildings
- Next: 6mm Thick Aluminium Corrugated Panels For Signage Board