Aluminium Corrugated Panels
HWSTRONGER aluminum corrugated panel is a kind of sandwich panel made from aluminum corrugated core bonded with one or two aluminum sheet. The corrugated core bonded with one aluminum sheet is always used for ceilings, while the corrugated core bonded with two skins can replace the aluminum composite panels as signage board, wall decoration panels and etc.
The waved shape of aluminium corrugated core increased the bonding surface to aluminium sheet(compared with honeycomb core structure), thus has better bonding strength.
Aluminium corrugated panel without back skins for ceilings
Aluminium corrugated panel with both skins for signage board, wall cladding.
|Material of Aluminum sheet||Aluminum Alloy A3003H16-H18|
|Thickness of the front sheet||0.5mm-1.0mm, PVDF coated for exterior use, PE coated for interior use|
|Thickness of the back sheet||0.4mm - 1.0mm, primer coating or mill finish|
|Material of Aluminum corrugated sheet|
Aluminum Alloy AL100H16-H18
wall thickness 0.2mm-0.3mm
|Panel size||4ftx8ft, 1220x2440mm, customize sizes|
|Panel thickness||4mm, 5mm, 6mm, 7mm, 8mm, 10mm, customize|
1. High Bonding Stength, durable adhesion:
The corrugated core structure makes the bonding to aluminium sheet rigid and durable. The tensile strength of the panel can be up to 2Mpa.
5mm corrugated panel with both skins weighs only 4.5kg/m2.
3. 100% recyclable
4. Large size is available to save energy and installation cost.
Max. size of the corrugated panel is 1500x6000mm.
HWSTRONGER aluminum corrugated panel is A2 fire rated according to GB8624-2012.
6. Can be processed into different shapes. The edges of the corrugated panel without rear skin can be folded into hooked shapes and to be easily installed. The edges of the corrugated panels with both skins can be sealed.
6. Energy Saving and Environmental Protection
The core sheet of the aluminum corrugated panel is of the water ripple shape, which forms an air passageway between the front skin and back skin, that is, a hollow system, so that the sheet is among the best products for heat insulation. Under the action of solar radiation, the air in the passageway rises in temperature and flows upwards, taking the heat away and having the performance of insulating against heat. In a cold area, the sealing of the upper and lower ends of the corrugated passageway in sunlight in the daytime helps store heat energy and reduce the running off of indoor heating, having the performance of heat insulation. The remainder of the corrugated sheet in engineering can be recovered by 100%, being environmentally-fi iendly and pollution-free.